Industrial Electric Furnace Carbon Fiber Special Furnace used for
the pre-oxidation process of binder-based carbon fiber
➢Pre-oxidation furnace
This type of furnace is used for the pre-oxidation process of
binder-based carbon fibers, asphalt-based carbon fibers and
PAN-based carbon fibers. It is of the unique hot air circulating
structure, the advanced air return duct design makes the oxygen
content of the hearth full, the airflow temperature in the furnace
is uniform, the temperature field uniformity ±1.5℃ is realized, so
as to ensure the consistent oxidation density of the whole tow
belt.
According to the output requirements, three different air blowing
methods make sure the linear large molecular chains of the
filaments are transformed into a heat resistant gradient structure
after the pre-oxidation, the products are not fused or burned, so
as to make sure the fiber forms are unchanged when in
high-temperature carbonization.
The inside of the furnace is an inner hearth of an anti-corrosive
stainless structure, the cleanliness is high, the appearance is
attractive and the structure is stable.
The whole-fiber ultra-lightweight material insulates heat, so that
the overall energy consumption is lower, energy is saved and the
environment is protected. It is the ideal equipment for producing
high-performance carbon fiber materials.
►The equipment is non-standard and customized.
➢ Technical Parameters
| Technical Parameters of Pre-oxidation Furnace |
| Model | FTY |
| Maximum Temperature | 400℃ |
| Service Temperature | 100℃-300℃ |
| Number of Temperature Zones | 1-5 |
| Width of furnace mouth | 100-1000mm |
| Length of heating zone | 1000-6000mm |
| Number of tow layers | 5-7 |
| Length of heating zone | 1000-12000mm |
| Heating element | Explosion-proof heater |
| Wind velocity | ≤5m/S |
| Heating method | Electric heating |
| Fire control medium | Water |
➢ Low- and medium-temperature carbonization furnace
Fully understand the filament carbonization process. The designed
temperature is 300~1150℃, a temperature gradient from low to high
is formed, so that the pyrolysis process is step by step. The
air-circuit system is unique, the air curtain is labyrinth-like,
the oxygen content within the hearth is ≤10ppm, the waste gas
exhaust system can make the pyrolysis process generate a lot of
waste gas and tar, and they are exhausted out of the hearth
instantaneously. The water-cooled device is arranged on the outlet
end, so that the fibers are cooled down to be lower than 500℃ and
then enter the external space, so as to prevent oxidation.
►The equipment is non-standard and customized.
➢ Technical Parameters
| Technical Parameters of Low- and Medium-temperature Carbonization
Furnace |
| Model | FTH |
| Maximum Temperature | 1150℃ |
| Service Temperature | 100℃-1050℃ |
| Number of Temperature Zones | 5-10 |
| Width of furnace mouth | 300-1000mm |
| Transmission method | Wire guide bar or mesh belt |
| Length of heating zone | 1000-12000mm |
| Heating element | Explosion-proof heater |
| Cooling method | Water-cooled |
| Heating method | Electric heating |
| Oxygen content | ≤10ppm |
FAQ:
Q: Are you a trading company or a manufacturer?
A: We are one of a leading manufacturer specialized in all kinds of
laboratory furnaces and industrial furnaces in China.
Q: Can you produce furnaces according to our requirement?
A: Yes, of course, we can. We can design and produce all kinds of
furnaces according to customers’ demand.
Q: Can we be your agent in our country or district?
A: Yes, we are looking for agent and distributors nowadays. If you
have interest to be our agent, please contact with us freely, we
would like to give you favorite policy to support you.
Q: How do you control the quality?
A: The soul of the quality lies in the spirit of the craftsman, we
well understand quality is the basic of survive of an enterprise.
We always emphasize in quality control, we test each furnace to
guarantee the perfect performance of our furnace before supplying
it to customer.
Q: Can you provide free samples?
A: Sorry, we can not supply samples because the cost is high.
Q: How do you pack the furnace?
A: Plywood box with pallet.
Q: Can you pack the products according to our special requirement?
A: Yes, we can. but you have to bear the price spreads of different
package.
Q: Can you OEM?
A: Yes, we can OEM according to your drawings.
Q: How long is you delivery time?
A: Usually 20-45 days according to your ordered quantity.
Q: What about your payment terms?
A: a. 100% T/T in advance if the amount is less than USD 1000.00;
30% T/T in advance, the balance before delivery if the amount is
over than USD1000.00
b. 100% irrevocable, confirmed L/C at sight (Only when the amount is
very large.)
